In construction and decoration scenarios, PP elbows serve as core connecting components for PP pipe systems, mainly achieving flexible connection between pipes and adapting to spatial layout constraints through two primary connection methods.

Installation Methods

The first is hot-melt welding, which is the most commonly used method for industrial and high-demand domestic scenarios (such as water supply and drainage pipelines). During operation, a hot-melt machine heats the inner wall of the PP elbow and the outer wall of the PP pipe to a specific temperature (usually 200-230℃) simultaneously. After the material surfaces melt and become viscous, the pipe is quickly inserted into the elbow socket and kept still until cooling and solidification. This method forms a seamless connection where the interface strength is even higher than that of the pipe itself, effectively preventing leakage and ensuring long-term stability of the pipeline system. The second method is socket connection with sealing rings, which is more suitable for low-pressure and easy-maintenance scenarios (such as temporary drainage pipelines in decoration sites). A special PP sealing ring is first placed in the socket of the elbow, and then the end of the pipe is coated with a dedicated PP pipe adhesive (or directly inserted with appropriate force). The sealing ring deforms to fill the gap between the pipe and the elbow, achieving a leak-proof effect. This method is simple and fast, allowing for convenient disassembly and replacement if adjustments are needed during the decoration process.​

PP elbows offer significant advantages in construction and decoration, making them widely used in multiple scenarios. In terms of benefits, their excellent corrosion resistance ensures they are not eroded by domestic wastewater (containing detergents, grease, etc.) or slightly acidic/alkaline water in building pipelines, avoiding rusting and blockage problems that often occur with metal elbows, thus reducing maintenance costs and extending the service life of the pipeline system. The lightweight characteristic (only about 1/8 the weight of metal elbows) reduces the load on building structures (especially for overhead pipelines or wall-mounted installations) and simplifies transportation and on-site construction, eliminating the need for heavy lifting equipment and saving labor costs. Additionally, the smooth inner wall of PP elbows minimizes fluid resistance, preventing the accumulation of dirt, hair, and other impurities, which is crucial for maintaining smooth water flow in domestic drainage pipelines (such as kitchen and bathroom drains).​

In specific construction and decoration uses, PP elbows are applied in various key pipeline layouts. In residential interior decoration, 90° PP elbows are commonly used at the corners of kitchen and bathroom pipelines (such as connecting vertical drainage pipes and horizontal floor drains) to adapt to the limited space between walls and cabinets, ensuring the pipeline layout is neat and does not occupy excessive usable space. 45° PP elbows are often used in long-distance drainage pipelines (such as balcony drainage or basement drainage) to reduce the impact of fluid on the pipeline wall, slow down the flow rate, and avoid noise caused by rapid water flow and pipeline vibration. In public building construction (such as shopping malls, office buildings), large-diameter PP elbows (with nominal diameters of DN110 or above) are used in the main building drainage system, connecting the horizontal main pipes and vertical risers to ensure efficient discharge of a large amount of domestic wastewater. Moreover, in building rainwater drainage systems, PP elbows are used to connect the roof rainwater collection pipes and the ground drainage pipes, leveraging their weather resistance (ability to withstand outdoor temperature changes and ultraviolet radiation) to ensure the rainwater system operates normally for a long time without leakage or damage.